ATS HB00 Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator

ATS HB00 Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator

Instructions

       Medical research has proved that the accumulation of human body electrostatic is harmful to health, there are some people who are allergic skin, heart rhythm disorders, have a headache the symptom such as insomnia and irritability; Still others bristling, nervous, afraid of contact with metal objects. In addition, when the accumulation of human body electrostatic touch computer can make the computer crashes, electronic breakdown, flammable gas fire and explosion and other major hazards.

ATS HB00 type human body static eliminator is a new static electricity product, which design for petrochemical industry and electronic industry. It can quickly and efficiently eliminate human body static electricity. Its characteristic is Small volume, light weight, no power supply, easy installation, eliminate static no feeling, etc.

Execution standard

ATS HB00 type human body electrostatic eliminator subject to the following national standard design and manufacture

GB12158-2006 “Prevent electrostatic accidents general guidelines”

GB5074-2002 " Code for design of oil depot "

SH3097-2000 “Code for design of Petrochemical electrostatic grounding”

Usage occasion

For your safety, you are advised to use human body electrostatic eliminator in the following places:

1.oil depot and railway oil platforms, tank storage escalator entrance, and the terminal entrance etc.

2.Electronic workshop, computer room, lab room entrance, aviation, paint room entrance, etc

3.Gas station oil discharge site, self-help station entrance, automatic tanker and so on

4.Other eliminate human body electrostatic operations place.

Stationary type

Technical indicators

1.ball material: stainless steel(202/304)

2.Releasing current: ≤0.1mA

3.Static electricity releasing time:≤1S
4.Environmental humidity:≤80%(40℃)

5.Environmental temperature::-40℃~60℃

mechanical parameters

1.touching ball diameter: Φ100mm

2.pole diameter: Φ63mm

3.pole wall thickness: 1.0mm

4.Product total length:1150mm

5.ground cable length:1.5m

Installation:

Step 1.Drilling relative holes in the ground, put the Expansion bolts into the hole(in order to avoid the installation hole too deep, should put into the Expanding bolts and slightly tighten nuts until not fall off, and then take off nuts).

Step 2. Insert the bolt into the according hole on the base plate of the product and fix it by the nuts,and then connect grounding device such as pole and earthing piles With a grounding cable

Application: Using hand to touch the top of the metal ball 0.1s, the static of human body Can be eliminated.

Maintenance

1.Keep the equipment clean, regular cleaning touch the dirt and oil on the ball, prevent the influence of human body electrostatic release.

2.Regular inspection and maintenance of the equipment, check whether fittings such as ground wire grounding bolt looseness or not, lest cause bad earth

3.Steel pipe can't enter the sundry, especially metal, because there is the original circuit, if into the metal, will make the circuit doesn't work

Product design service life is more than 3 years, and 1 year warranty by our factory.